You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
outlet
An outlet store, factory outlet or factory shop is a brick and mortar or online store in which manufacturers sell their stock directly to the public. Traditionally, a factory outlet was a store attached to a factory or warehouse, sometimes allowing customers to watch the production process such as in the original L.L. Bean store. In modern usage, outlet stores are typically manufacturer-branded stores such as Gap or Bon Worth grouped together in outlet malls. The invention of the factory outlet store is often credited to Harold Alfond, founder of the Dexter Shoe Company.
Im looking to install a saniflo or similar, with the outlet rising up through a flat roof and into a soil stack above.
The problem is, this obviously poses a frost risk. Ideally I would like to have a method of draining back the contents of the pipework above the roof level once the pumping...
Hi Folks, I want to connect a bath waste outlet to a hose, but I'm struggling to configure it. It's for a temporary rainwater collection system that's being installed on a remote farm. I need to get from the plughole to a connector that will fit a hose. But I keep drawing a blank, but I'm...
Hey all. I'm installing a new toilet (Bunnings special...) in my ensuite.
I seemingly had it all connected properly, but when I was testing for leaks by flushing over and over it started leaking.. It seems like it's leaking where the rubber vario bend seal goes over the china toilet pan outlet...
Ok so, I supplied a shower valve, overhead shower and riser to a customer that was having it installed by a plumber. Hands up I made a mistake when I ordered the valve and supplied a single outlet instead of twin. If the plumber had called me at time of install I could have swapped it for him...
Me again. This turning out to be a nightmare from hell this bathroom. Your help do far has been invaluable.
So, the next issue is one that I may not be able to explain very well. The pictures may not help either.
Just installing the the Mcalpine bath trap and outlet. I needed it because it...
By chance I have found that the word o u t l e t triggers the spam filter so can't be used in a post. Unless there's a reason for it (which I can't fathom) it's quite a useful word to be able to include in a post.
Hi folks
Following on from another thread I made recently, the plumber has agreed that the new cold feed he added to our loft cistern should have been lower than the existing feed to the cylinder for hot (he put them both roughly the same at 50mm) and he is proposing to put it right. In terms...
Evening all,
Concealed valve install coming up. A fixed head and a handheld, both of which have 1/2” threads of different lengths.
How do I get the wall plates in exactly the right position behind the wall?
Thanks in advance
I've bought 4 new rads to replace existing ones. They are all singles and have inlet marked on lefthand side. The problem is that the existing pipework (microbore, plastered in-wall) has the inflow sometimes on the right and sometimes on the left. As the rads are singles I can't reverse them...
Hi all,
I need to take a urinal off a panel to fit some plastic covering to the panel. Can someone tell me what size might be the nut holding the water outlet onto the urinal. It is an ideal standard.
Thanks
Hi all. I've got a square elbow outlet that I want to plumb in next to my wall tap.
Might sound like a daft question but it's got a securing nut so o
How on earth do I secure it to a solid wall.
I could reposition to a stud wall that I have access to to screw secure but I don't really want it...
Hi all,
I'm about to replace the pump used for my power shower / bath filler. It's a Stuart-Turner Turbo 30T 3.0bar pump, 22mm inlet and outlet. The installation has been done so that the 22mm outlet reduces to 15mm pipework within less than a metre of the pump. I was thinking of...
Hi all,
Hope you are all well.
I removed an old toilet from a wetroom. I wanted to replace it with a modern toilet.
The old toilet had a separate cistern connected to it via a 90° pipe (this pushed the toilet away from The wall) and the outlet was a 90° connector that went into the floor.
My...
Preview
Hi
I need to move my existing external toilet and bath outlets due to having a rear extension built and they foul the roofline.
After advice / opinions on my preferred option which I have included as a sketch.
My main concern is:
1, If I'll need air admittance valves and where they need...
Hello! Thanks so much for looking at my problem. I'm not a professional so I'd really appreciate any advice you can give.
My problem: I have a bathroom sink with a P trap that has an integrated flexible accordion-style section. Unsurprisingly, it leaks and stinks. It's also installed backwards...
I hoping y'all can just educate me a bit and make me feel better about spending $2500 to fix this. I'm selling my rent house and my realtor suggested I have my foundation warranty company do an inspection so we could proactively say the foundation is good. Well the warranty company has a...
What are the best pipes and fittings to carry steam from a 2.8kW steam generator to a steam cabin for a short pipe distance of 400mm?
Thinking on the technical, the pipework would have a low internal resistance (smooth inside) and full bore so as not to reduce the steam out. I noticed the...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.