A
Aldred1990
hi guys what size drill bit would you recommend for drilling the hole for 15mm copper pipe. thanks
Discuss outside tap in the Plumbing Jobs | The Job-board area at PlumbersForums.net
110 mm core bit
18mm hole with the grey tape to protect copper...
Queue the onslaught...
Keep it tight and use this, for best job ever.
Keep it tight and use this, for best job ever.
DCV fitted inside ?
I use a 16mm bit first followed by a 20mm bit and insert 20mm electrical conduit which the 15mm copper glides through:
View attachment 13986 View attachment 13985
my only issue is that you cant drain the water out over the winter if you pipe it upto the tap
Which is why I fit a drain cock too.my only issue is that you cant drain the water out over the winter if you pipe it upto the tap
Reply to outside tap in the Plumbing Jobs | The Job-board area at PlumbersForums.net