Currently reading:
Zone Valves

Discuss Zone Valves in the Plumbing Zone area at PlumbersForums.net

Scott_D

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
6,128
What are the best zone valves in your opinion?
I mostly fit honeywell but as prices creep up I am thinking are they any better than danfoss, drayton EPH?
 
Honeywell or Drayton some people say eph are ok but haven’t tried as no one stocks them locally
 
If there from unvented components then there real ;) only down the road from me
 
Its not but they are actually cheaper again - under £50 for 22mm.
I will place an order

Yep they just come in oem boxes like you get with cylinders etc but fully gen Honeywell’s
 
I've always used Honeywell's.
Mainly because you can remove the motor without removing the valve.
You don't have to drain down to replace the whole valve if only the motor is faulty.
Mind you - replaced plenty of Honeywell motors.
 
I've always used Honeywell's.
Mainly because you can remove the motor without removing the valve.
You don't have to drain down to replace the whole valve if only the motor is faulty.
Mind you - replaced plenty of Honeywell motors.
True, but same goes for Altech, Danfoss, Potterton...
 

Too many Scott ?
 

Reply to Zone Valves in the Plumbing Zone area at PlumbersForums.net

Back
Top