At present I have a Saniflo system connected. Only a toilet and sink. When I flush the toilet I hear the sink gurgle once the system finishes activating. Not sure exactly why. That said I have the Saniflo system vented to the outside as per instructions. The sink is installed directly to the Saniflo tank as per instructions. The main vent stack is roughly 15 feet away from where the Saniflo tank is located. Any ideas on why the sink would be gurgling when the toilet is flushed and how to remedy it??
Discuss Saniflo Gurgle When Flushed in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net
Reply to Saniflo Gurgle When Flushed in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net
Similar plumbing topics
Hi guys question about saniflos đź’© I'm working at a property that the entire place was fed off a sani, that's packed up, blocked the line entirely...
Hi all, grateful for your expertise on the following. DIYer, not pro.
Rural property in France
Single storey. Septic tank. Late 80s construction...
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking?
This originally happened about 12 months ago and has happened 3-4...
This issue arose about a year ago. Does anyone have an idea why I occasionally hear (about once every hour or longer) a hammer related noise...
Hi there,
I have a commercial customer who asked me a few months ago to investigate a toilet that kept blocking. They'd just had the blockage...
Newest Plumbing Threads
-
Help sourcing imperial fittings/adaptors
- Started by Gary M
- Replies: 2
-
-
Air inside ideal Logic 24 boiler system
- Started by Turbotim
- Replies: 3
-
What's the most convenient way for me to plumb drainage channel?
- Started by Instadeth
- Replies: 2
-
-
Y Plan central heating gets hot on hot water demand
- Started by MPGASANDPLUMBING
- Replies: 2
-
Grant boiler rusting inside after 1 yr
- Started by RayPlumb
- Replies: 10