Discuss recommendation And advice are welcome. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

O

Old Account

hi lads,

I just went today to a customer which wants me to convert his back boiler and hot water cylinder to a sealed system. He wants me to install a Vaillant 938 with 11 rads ( most of them are large 1400x600 ) and future 2 bathrooms.
He is worried that the pressure will drop significantly but I assured him due to my experience and based on Vaillant that it won’t happen and that the 938 will be fine. He is upgrading the mains water supply to 32 mdpe.
Will this type of boiler enough for future zoning? He is planning on splitting the zones in to 3 zones which are ufh downstairs, upstairs rads, downstairs rads.

However, at the moment his last radiator in the bathroom upstairs is only working half way ( vertical radiator). The difference between the F&E tank and the vertical Rad is about 10-20cm at max. Is that the problem why it doesn’t work in full?

Thank you for your help
 
Should still work.
System dirty, or not balanced, or not piped with big enough pipes, or pump not up to job?
Tha k you very much Gary. To be fair, I believe you are so right about dirty system as it never has been serviced and flushed in the last 50 years. The next thing is the central heating pipes from the boiler are starting in 22mm but after 2 m it reduces to 15mm.at the moment they only have downstairs rads and one added upstairs bathroom. The rest of the property has those old type gas heaters in the wall ( never seen them before ). Surely not balanced either. I was thinking air could be trapped too.
 
Because the mounted 20-liter storage behind the initial boiler makes as much as a conventional 70-liter storage cylinder therefore I’m thinking it should be well enough
 
I believe you to be miss informed here mate.
I spoke to Vaillant a few times back in Germany and we have the same boiler but with less kw. If you scroll down you will see in the description there is clearly written what the boiler is capable off.
Wandheizgerät ecoTEC plus VCI - Produktinfos | Vaillant

However, what size of property is it? Have you spoken to Vaillant yet? For how long is that going on for and is it since the beginning?
 
I spoke to Vaillant a few times back in Germany and we have the same boiler but with less kw. If you scroll down you will see in the description there is clearly written what the boiler is capable off.
Wandheizgerät ecoTEC plus VCI - Produktinfos | Vaillant

But that isn’t what you said mate. You referenced to the storage vessels. They are not 20 litres. They are 15 between them. The 20ltrs refers to the possible flow rate.
 
New posts

Reply to recommendation And advice are welcome. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Newest Plumbing Threads

Back
Top