Pipe bender tool box

[TMHM]

Just got myself a new 15/22mm pipe bender and am looking for a container. I have seen a couple of bespoke bags, but would rather a solid case of some form, if available.

Any ideas or pointers as to a suitable solid container?

 

[Gasmk1]

That would need a large metal box bags are a simpler and cheaper route

 

[Gasmk1]

vidaXL Aluminium Box 80.5x22x22 cm Silver - https://www.vidaxl.co.uk/e/8718475616344/vidaxl-aluminium-box-80.5x22x22-cm-silver?gclid=CjwKCAiAirb_BRBNEiwALHlnD3w64ldbTqp6LlQLeSvGwhszca9NW1rJIqfjPoQgKVbzWdF9ENpO5RoCmcYQAvD_BwE not sure of length of tube benders

 

[Aquarius]

What about using a standard toolbox with tray removed? Stanley 28" Fatmax Toolbox Wheels And Handle | Zoro UK - https://www.zoro.co.uk/shop/storage-and-handling/toolboxes-/fmst1-75761-28%22-fatmax-toolbox-wheels-and-handle/p/ZT1018214X?utm_source=google&utm_campaign=pla%2B%7C%2BStorage%20%26%20Handling&utm_term=ZT1018214X&utm_medium=pla_css_3&targetid=aud-931066382850la-458226226277&loc_physical_ms=1007189&dev=t&gclid=EAIaIQobChMI17CY1IH57QIVj6ztCh3HsAMVEAQYFSABEgLMQPD_BwE

 

[gmartine]

Next time you're on a site try and nab a length of 10" + vent pipe and make something up. Make some ends and a handle and line it with foam.

 

[gmartine]

Oh look, someones bothered to make a case for benders.

Faithfull FAIPBMBAG Pipe Bender Carry Bag

Tools, power tools, hand tools, electrical, plumbing supplies, ffx tools, FFX, Faithfull FAIPBMBAG Pipe Bender Carry Bag

www.ffx.co.uk

 

[TMHM]

Oh look, someones bothered to make a case for benders.

Faithfull FAIPBMBAG Pipe Bender Carry Bag

Tools, power tools, hand tools, electrical, plumbing supplies, ffx tools, FFX, Faithfull FAIPBMBAG Pipe Bender Carry Bag

www.ffx.co.uk

No they haven’t . It’s a bag

 

[gmartine]

No they haven’t . It’s a ***

Ouch, fixed that for you.

 

[WC1]

Not too bothered about a case but would like to be able to keep the formers with the benders. Always seem to be looking for them..

 

[Keefy]

Can't help with a container/storage box as such but I've kept my 15mm former inside the hollow handle for the last 20 odd years. No time wasted searching for the former for me.

 

[WC1]

Hilmors- won't go! Did you shave a bit off? Or bigger handle?

 

[TMHM]

Hilmors- won't go! Did you shave a bit off? Or bigger handle?

Or a magnet embedded into the formers?

 

[Timmy D]

Not too bothered about a case but would like to be able to keep the formers with the benders. Always seem to be looking for them..

Munsens to attach copper to handle, cap off with push fit cap for ease of access.

 

[TMHM]

Do any if you have a scrap 800mm length of 160/200mm dia waste pipe floating around in a skip somewhere, cos I could do with a piece.

 

[Timmy D]

Do any if you have a scrap 800mm length of 160/200mm dia waste pipe floating around in a skip somewhere, cos I could do with a piece.

Prop got a bit of 160mm underground laying about.
What’s it for? Anything interesting?

Where in London are you?

 

[TMHM]

It’s to fit my pipe bender into, as in previous posts. I can get 3m lengths, but that’s just a waste. I think 800mm is about the correct length. Then I just need to get a couple of caps.
I am in Basingstoke.

 

[Timmy D]

It’s to fit my pipe bender into, as in previous posts. I can get 3m lengths, but that’s just a waste. I think 800mm is about the correct length. Then I just need to get a couple of caps.
I am in Basingstoke.

Ah, you’re profile said London, thought you might be a bit closer.

Do you work up this way?

I’m West London, if I’ve got it and you venture up this way, you can have it.

 

[TMHM]

Ah, you’re profile said London, thought you might be a bit closer.

Do you work up this way?

I’m West London, if I’ve got it and you venture up this way, you can have it.

Thanks for the kind offer. Let me know if you find it. I will then work out collection or carriage.

 

[TMHM]

Ah, you’re profile said London, thought you might be a bit closer.

Do you work up this way?

I’m West London, if I’ve got it and you venture up this way, you can have it.

Any news?

 

[Timmy D]

Any news?

Not gonna lie, completely forgot. I’ve set an alarm to check the store room tomorrow morning

 

[Timmy D]

Any news?

I checked, sorry bro but someone’s had it.

 

[TMHM]

I checked, sorry bro but someone’s had it.

Ok. Thanks for looking