Council bathroom fitting

[Matt0029]

Anyone worked for the council installing bathrooms/kitchens possible adaptations?

 

[ShaunCorbs]

I used to do dis adaptations

 

[Matt0029]

I used to do dis adaptations

How did you find them? Where you direct for the council? I have a job offer to work for them on this side of the contract. I have my gas unvented etc. But the gas is a different department apparently.

 

[ShaunCorbs]

There ok problem is some of the houses you can guess but others were fantastic

On average it was 3 days per bathroom

Yes they normally sub out the gas side as it’s too much hassle we’ll ours council did

 

[Matt0029]

Can I ask how long you where there for?

 

[Matt0029]

Are they quiet hard work, you have to chase out a solid floor to set the tray into?

 

[ShaunCorbs]

I did it for I would say 6 ish years

And yes but depending on floor solid concrete yes akw tuff into floor but if byson beams / pre cast no going into the floor tray ontop and chase out for pumped drain etc

 

[Matt0029]

I did it for I would say 6 ish years

And yes but depending on floor solid concrete yes akw tuff into floor but if byson beams / pre cast no going into the floor tray ontop and chase out for pumped drain etc

So there was abit of a step on the tray?

 

[Matt0029]

Where you direct to the council?

 

[Matt0029]

Did you do all the chasing yourself?

 

[ShaunCorbs]

So there was abit of a step on the tray?

Yes 35-40mm if on precast / byson beams

 

[ShaunCorbs]

Did you do all the chasing yourself?

Yes all work turn key

 

[Matt0029]

Did you like it? I think maybe in the long term I may get bord just fitting bathrooms

 

[Matt0029]

Yes all work turn key

Did you have to do any plasterboarding etc?

 

[ShaunCorbs]

Did you like it? I think maybe in the long term I may get bord just fitting bathrooms

Yes and no depends on the clients let’s say old mrs Jones would do them day in day out and be greatful

Then you get the others just take take take