Advice on radiator installation

[lolly2022]

Hi guys , just looking for some advice. Our building contractor is doing a compete replumb and we have a on a radiator he installed. it was to be wall mounted and the pipes were set to come out of the wall. It's not as clean as I thought it would be as i thought the pipework would go straight into the radiator. and just wondering if this looks correct ? And if not what do I need to tell them to do to rectify it

 

[ShaunCorbs]

Simone has first fixed the pipework too low

Two options live with it

Or get them to rip the tiles off and lift the pipes

 

[lolly2022]

Simone has first fixed the pipework too low

Two options live with it

Or get them to rip the tiles off and lift the pipes

Is there any particular reason the radiator height can't be dropped to the existing pipe height?

 

[ShaunCorbs]

Is there any particular reason the radiator height can't be dropped to the existing pipe height?

Too low height wise and you wouldn’t be able to use the valves

 

[king of pipes]

That's the wrong configuration for corner valves as you say these pipes should come directly out of the wall into the valves as below

 

[Ben-gee]

Simone has first fixed the pipework too low

Don’t blame her, she’s a lovely girl and was just following instructions.

 

[SimonG]

2 chrome compression elbows, 2 pieces of chrome pipe, 2 chrome pipe covers.

Or rip it to bits.

 

[ShaunCorbs]

Don’t blame her, she’s a lovely girl and was just following instructions.

I’ve just twigged at what you meant sorry Simone