I had a new EcoMAX 622/E condensing boiler installed about 3 years ago and it has worked well until now, only needing to be filled up now and then. Hot water storage is in a Santon pressurised cylinder.
At the end of last week I started to have a problem and it's been playing up since then...
belp
Thread
boiler
central heating system
condensing
cylinder
drain
ecomax
expansion
expansion vessel
hot
hot water
inside
oil
plumber
pressurepressureproblem
pressurised
problemproblems
pump
remove
system
test
vaillant
valve
vessel
water
hi guys ronnie here,
i've got a problem with my baxi 105e boiler: the pressure is at zero and we have no hot water.
a plumber has advised to raise the pressure by turning one of the taps underneath the boiler but there are about 4 taps, we tried one but it didn't work and are worried about...
ronnie
Thread
baxi
bits
boiler
central heating system
cold
diverter valve
gas
hose
hot
hot water
mains
no hot water
paint
pipe
plumber
pressurepressureproblemproblem
system
tap
taps
valve
valves
water
work
Hi all,
My cousin is living in High Barnet,North London, an area apparently known for less than normal water pressure due to the area elevation.
When she first moved in, the water flow and pressure was quite good throughout the house,hot and cold.
She then had a new Vaillant EcoTec Plus 824...
Nigel 206
Thread
bar
boiler
button
cistern
cold
combi
filling loop
fitting
hot water
kitchen
pipe
pressurepressureproblemproblemproblems
pump
sink
system
tap
taps
vaillant
water
work
Hi All,Ive been asked to fit a inline electrolytic scale inhibitor by a mate.i know they are meant to be fitted after the stopcock for the property and before the system branches but the poles who did the renovation to the flat removed the old one and never fitted a new stopcock! and where the...
ESplumber
Thread
cold
cold water
cold water storage
copper
drain
fitting
gas
hot
hot water
inhibitor
london
pipes
plumbing
polish
pressurepressureproblemproblem
public
regulations
renovation
scale
scale inhibitor
supply
tank
tap
water
water pressure
work
I hope someone can give me a hand! I've got a Baxi 130 HE Combi Condensing boiler. A local plumber fitted the filling loop and repressurised it last week (it had dropped below 1 bar) to about 1.5 bar.
A day later the pressure was up to over 3 bar. The pressure release valve was open and...
robbo32
Thread
bar
baxi
boiler
central heating system
cold
combi
combination
condensing
expansion
expansion vessel
filling loop
local plumber
plumber
pressurepressureproblem
pressurised
problem
radiators
remove
system
valve
vessel
water
Hi i wonder if anyone could give me some advice.
Im helping out my brother in law refurb his flat and have had problem after problem
Anyway, first problem was the water had been turned off for a couple of weeks and when i went to turn it back on the stopcock burst, fixed that problem but now...
Woody123
Thread
boiler
central heating system
cold
combi
cylinder
drain
drains
expansion
header tank
hot
indirect
loft
pipe
pressurepressureproblemproblem
pump
radiator
sealed
system
tap
vent
vessel
water
I have a problem where my boiler keeps losing pressure. I have had a new boiler fitted in the last few months but have/had the problem with both the old and new boilers.
It seems that when I go around and bleed the radiators etc. the problem becomes even worse in so much as when we get up...
mbird59
Thread
air
bleed
bleeding
boiler
boilers
central heating system
cold
combi
combi boiler
copper
cylinder
expansion
high
hot water
leak
oil
overflow
pressurepressure loss
pressureproblemproblem
radiators
showers
system
vessel
water
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.