The system : S plan with the hot water cylinder in the loft and the F&E tank about two feet (max) above the cylinder. The cold feed from the F&E tank and the cylinder flow/return disappear into the eaves of the roof (inaccessible), run down some boxwork in the first floor hall and then...
A short while ago my heating stopped working. The engineer came out twice and said that some type of connection was not being made between some box upstairs (that only has a green or red light on it) and the temperature gauge downstairs in the hallway. He said that this meant something wasn't...
Sammygirl1
Thread
boiler
combi
combi boiler
help
hothotwater
ideal
ideal logic
logic
nohotwater
oil
please
water
Motor on the diverter valve is responsive to heating demand but not hot water. What could this be? DHW flow switch, or pcb, or something else I've over looked. Any help would be appreciated :smiley2:
Motor on the diverter valve is responsive to heating demand but not hot water. What could this be? DHW flow switch, or pcb, or something else I've over looked. I'm gas safe registered if anyone could help with this problem.
Neddy1984
Thread
could
gasman
heat
hothotwaternohotwater
section
water
Hi, was wondering if anyone can shed any light on this.
If i turn on the hot water tap in the kitchen cold water comes out. I thought it must be a problem with the combi boiler but it wasnt showing an error, I tried reseting it but still only cold water.
Then i checked the other taps in the...
Hi guys
Changed 5 radiators yesterday. now customer saying no hot water. 2 2 port valves. hw cylinder in the loft.
Turned hw on at programmer and hear the motorised valve and boiler fires up and is running but for some reason not getting hot water.
What should i be checking? I have to go...
Hi
boiler fine in Central heating mode but no hot water. Demand sensed by hall sensor, pump running ,no fan. The Motorised valve seems to be moving ok although was thinking about changing it... Wasn't sure whether once motorised valve moves it sends signal back to board to carry on with...
combi boiler had no pressure although water was still running, anyway i got the pressure back to 1 bar using the hose that the plumber who fitted the boiler left on.... i had to do it slowly as the valve itself started leaking and now after a couple of hours theres no hot water, broken pump or...
Arron Lowley
Thread
after
bar
boiler
hothotwaternohotwater
pressure
tried
water
you've
Hi please can somebody help I have a baxi 5e boiler and can't get hot water in the kitchen or the up stairs sink basin the boiler just won't fire up but can get hot water from the bath tap only then can I get water from the basin and down stairs don't have any leaks what I can see the the...
I have a potterton performa28 combi. When the heating is off there is no hot water. I have had several parts replaced by a competent Gas Safe engineer but still having problems. I'd be pleased to receive any advice.
teecee1941
Thread
above
boiler
could
engineer
hothotwaternohotwater
potterton
water
Hi,
been to look at a 35cdi II, it doesn't fire when calling for hot water. Narrowed it down to either changing the Diverter Valve or the Diverter Valve Micro Switch Assembly. I spoke to technical and they said to see whether the 'pin' was moving when the hot tap is opened and closed. Does...
Need help. My fully pumped system won't switches on when it's calling for just hot water. To get hot water, both hot water and central heating has to be on at the programmer. If only HW is on at programmer, it will not come on. I am not sure is it programmer or 2 port valve.
Padam442
Thread
heating
hothotwaternohotwater
programmer
system
valve
water
Hi guys
was hoping somebody could help me out,I have a baxi 105e combi the heating works fine but when I turn hot water on it runs cold unless I turn the tap down until it's practically dribbling out,then the water gets warm but it takes 30 mins to run a bath lol changed the diapragm but did...
hi i have just moved into a 12 year old bungalow this has oil fired heating and hot water (not a combi boiler ) all was ok untill i had a shower this is gravity fed and not much use (dont think its been used for years ) i think since using it i now cannot get any hot water at all. Central...
hello i have a performa 24 gc 47-393-06 an old one.3 months ago the hws was cold and the diverter valve pin was not operating the micro switch so i changed the diaphram and every thing was fine for the last 3 months then last night ran a bath with hot water was fine then after went down stairs...
Hi all,
I am new to the forum and I have a problem with my Potterton Suprima (not sure if there is a model number or anything you may need to help), in that the central heating works perfectly, we had an issue with the hot water actuator valve, which I have since replaced thinking that this...
eccy
Thread
actuator
changed
heating
hothotwaternohotwater
potterton
potterton suprima
suprima
system
water
hi heatline vizo no hot water in water only mode, boiler is up stairs but when i turn on the central heating i get hot water in the kitchen down stairs but intermittent warmish in the bathroom up stairs
doogiee
Thread
boiler
heatline
hothotwaternohotwater
stairs
water
Apologies in advance, I am posting on behalf of my partner who did a little plumbing job yesterday, he's only really a novice at these things and now clueless as to what to do.!
He drained off the water to fit a new sink, including emptying the full hot water tank. He reconnected the water...
Frankod
Thread
drained
hothotwater
mixer
nohotwater
overflow
sink
water
wrong
I have a Gledhill Boilermate OV a Class. Boiler switched off, gas board came out to check everything boiler started again. Since then Central heating is working fine but the hot water is not consistent. I get a small amount of water, enough for a very quick shower, not enough for a bath. If you...
Stewartk
Thread
again
board
boiler
boilermate
class
enough
gledhill
hothotwaternohotwater
oil
water