Good evening chaps
Having issues with this new valve.
It is serving four body jets, all tiled now (waiting for the 14 day grout cure before full pressure test)
Fitted jets, cracked supplies to check watertight, and this happened.....
Top flow valve closed, temperature valve set mid way
Crack...
whats the best and quickest method of filing off the chrome plating on chrome 15mm copper? And is chrome pipe bendable? Any method I need to adopt to bend it?
Doing a job next week fitting 10 new rads and the woman wants all rads to have chrome pipework coming up from floor.
Hi,
New to the forum so just like to say hello all.
Joined as I'm a bit stuck and in need of your help.
Moved into a 70's built property that has the original green bathroom and quite possibly original fittings. We are making do until we can afford to rip out the bathroom and start...
I have the above problem after having done all my en suite piping in solvent weld due to the majority of connections being hidden away under tiles - only 1x 40mm T piece in the wall prior to entering the soil stack, converted to 32mm for the sink which is 800mm above it - yet to test before...
Hi All
I need to replace these 1960's rad valves and I'm not sure of the thread sizes.
The 'vertical' thread is for a 22mm or 3/4in pipe connection but the 'horizontal' thread has a diameter of 31.5mm and the nut is 37mm across the flats.
Are replacements for these valves available. I'm not too...
Hey guys I'm hoping maybe someone has removed this type of toilet seat before as I don't want to risk breaking the pan. I have taken out the 2 Allen key bits left and right and I assumed it would just lift off but it doesn't does anyone know or can help please?
Pictures are attached
david
Dparker357
Thread
chrome
oil
other
removal
removed
right
toilet
toilet seat
video
Any one know supplier where I can get chrome compression spigot elbow to go 15mm copper, can only find push-fit ones. I need it for radiator tails but I am using chrome plated copper so push fit will not work, also need them by Thursday:(
Help appreciated
I'd be grateful if anyone could let me know of a supplier for a chrome plated brass washer with an outside diameter of 80mm and a central hole of 48mm diameter, about 6mm thick.
I'm changing a bath tap for a customer. Old one was an Ideal Standard Domi, new one an Ideal Standard Ceraplan, and...
Hi, I need some advice.
A relative wants to go from 32mm grey PVC pipe to a chrome flush pipe into the back of the toilet. Is there a fitting that I can use that will allow this?
They currently have a bigger white plastic pipe glued over the top of the grey.
I've attached a photo that they have...
I am installing vertical column rads and want to use chrome plated pipes to the rad outlets through the floor, transitioning to pex in the basement. But so far I have had no luck finding anything suitable whatsoever. I know chrome plated pipe for plumbing applications exists because I have seen...
Hi, Please can someone help me with this
I need to replace the popup waste on my bath. At the overfow end there is a chrome cap that rotates to make the popup operate. I was expecting to find a grub screw at the bottom of this cap which I could unscrew to remove the cap but there is no screw I...
Hi, Please can someone help me with this
I need to replace the popup waste on my bath. At the overfow end there is a chrome cap that rotates to make the popup operate. I was expecting to find a grub screw at the bottom of this cap which I could unscrew to remove the cap but there is no screw...
Hi
I wonder if anyone could help me with a simple problem please.
The upper part of my sink tap has come loose and I can't figure out how to get to the nut/screw to tighten it. It looks as though the top cap should come off but it doesn't want to and I don't want to force it. It's a Bristan...
I have a new kitchen mixer tap and water drips out from the chrome collar around the swivel base. Can somebody please tell me if this collar should be tight as I can move it with my hand and if it while be tight would that cause water to drip as the seals inside should be ok if the tap is only a...
To save me looking, does anyone know if you can get a chromed brass 1 1/4" bottle trap that fits standard 1 1/4" waste pipe (not the smaller chrome plated brass/copper waste)?
I know mcalpine do the plastic chrome bottle traps but they look a bit naff.
Im trying to avoid using a mcalpine...
Hello Everyone,
New to the forum and looking for some advice please.
In our bathroom there is a thermostatic mixer valve under the bath. It only has a single pipe in and out which is the cold. After the valve the pipe then joins the hot water inlet for the bathroom. I adjusted the valve to...
SkinnyDogg
Thread
chrome
cold
heating
hot
hot water
mixer
mixer valve
pressure
removed
thermostat
thermostatic
valve
water
I have a couple of issues that I would like some help with please.
The first one is with converting a chrome 20mm (may possibly be 21mm) sink waste outlet pipe to either 32mm or 40mm for connection into a 110mm soil stack. Can someone please point me in the right direction of a supplier who...
craigskelly
Thread
chrome
conversion
either
outlet
sink
supplier
waste
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.