I have a 2 port concealed shower valve, I have connected the hot supply to hot inlet and cold supply to cold inlet.! But for some reason when I turn the dial to hot, cold wate comes out and vice Versa.!
Am I missing something.? 😫🤦🏻♂️
I have a contract with HomeServe to supply "emergency" plumbing service should I ever have a problem.
Recently I was clearing out the gutters using a plastic yogurt-pot-type-thing to scoop out the crud. Unfortunately, this pot fell down the soak-away pipe that the gutters drain in to.
I called...
Hi
I might need to part drain my HWC to fit a new Essex flange washer and I posted an earlier message thinking I did not have a drain valve , however I have noticed a valve connected to the cold supply which , if the cold supply is isolated , looks like it will drain the tank .Please check the...
Worcester Bosch Greenstar i combi installed. Since installation water hammer happens when hot taps are turned off, but only when the heating is on. Have you experienced the sam?
Hello,
I am a complete novice but am trying to repair a dripping tap using online instructons on replacing the valve. My kitchen mixer tap is dripping. I don't know whether it is the hot or the cold valve as I haven't managed to find a way to turn off just the hot water so have turned off the...
Hi, a plumber came today to fit a faulty component in my boiler as we have no hot water. In trying to remove the faulty component which was seized up, he damaged two other components which now also need replacing. He went away and will telephone me with quotes for the other two parts that I now...
I am having to work on a concealed shower but there is no service valve and so I am having to isolate from a large mixing valve which is linked to several other showers. I am going to add a service valve to make it easier for future maintenance but the pipe connected to the shower is 15mm...
I have purchased two Bristan Renaissance basin taps containing one black rubber washer each. The Bristan instructions say to put the rubber washer underneath the sink followed by the brass nut. I have always put the rubber washer underneath the tap and on top of the basin. Any suggestions of the...
I have a cold water sink in a shed a long way from the house. We just want to run a garden hose over to it and feed the tap from it.
The tap of course has a flexible hose underneath with a compression thread fitting I guess.
What sort of fitting or adapter do I look for so's I can plug my...
Deleted member 125263
Thread
america
compression
garden hose
hose
pipe
sink
thread
usa
Have an Ariston unvented hot water tank in airing cupboard with the red and white expansion vessels and a filler tap. As advised years ago on these forums when I hear that sound that the central heating water needs topping up I usually wait until cold so the gauge goes to zero and top up to 1...
Hi everyone,
I have CH with a system boiler with a header tank and 8mm micro bore pipes to the radiators, fairly standard setup I guess. House is 1990s.
My issue is that two of my radiators are cold, while the rest are perfectly fine. Both the problem radiators are downstairs and close...
Our boiler makes these very loud rumbling noises every 2-3 minutes. We're quite used to them now but they have become a lot more regular over the past year or so (it only used to happen once every half an hour or so) and they can be quite annoying. Our boiler is a Worcester Greenstar 24I Junior...
when the heating has been on for ages the bedroom radiator/pipe make a really really loud noise and vibrates. it stop when i turn the radiator off or turn the hot tap on. often having to leave the radiator off so it doesn't scare the family to death when they've gone to bed. any ideas?
Can anyone help me identify these pipes please? They are connected to a water tank in the roof of a tenement in Glasgow. I'm trying to work out which pipe is filling the tank from the mains supply, because pipe 2 also supplies all the water in my flat so I'm hoping it's not coming from the tank...
Hi my name is Bob and I have been shortlisted for an interview at a hospital as a maintenance plumber, and they told me to prepare my self don't know what they want me to prepare? Can someone help me please the interview is on the 20 this month.
Have got hot water coming from upstairs cold water taps. Nothing has been recently changed or adjusted.
System boiler connected to Heatrae Sadia CL210 unvented cylinder.
Anyone got any ideas as to what could be causing this?
I have 2 vertical radiators , when the TRV is fitted the radiators fail to get hot. I have replaced both TRVs for new and check the operation of the valve to confirm is correct operation but still no heat
If I removed the TRVs completely the radiators get hot, I would be grateful if someone...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.