Discuss Pop quiz, does anyone recognise this radiator valve? in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net
- Messages
- 34,368
- Solutions
- 2
Re Pack the gland under the shield
- Messages
- 34,368
- Solutions
- 2
Yes it unscrews
Undo the big slotted screw ontop of the head control wheel and remove the control wheel
Then use some rubber gloves or a rubber strap wrench or you can use an adjustable spanner on the top flats and the top part of the shield will unscrew you might need to use some grips / pump pliers note this will mark the brass but last resort
Then come back with a picture
Reply to Pop quiz, does anyone recognise this radiator valve? in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net
Similar plumbing topics
Hi All,
I need to replace a radiator in the kitchen, the 10mm copper has split so using this opertunaty to replace it with a towel one and also...
Hello, I have a customer with a modern anthracite vertical radiator and a modern TRV and lockshield.
The radiator makes a loud metallic bang from...
Hi I have a leaking TRV on a downstairs radiator and need to get it replaced/fixed.
Can anyone on here tell me the average cost to have this done...
Hi there, can anybody help?
I am trying to buy a replacement toilet flush push button as my current one is broken? However I cannot find the same...
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about...