What we all working on this week ?

[king of pipes]

I have a insurance job to try and rescue a poorly installed quad shower the customer wants to save the tiling if possible and has a few spare so fingers crossed it may work , the loss adjuster allowed em £1500 that will just about cover materials. Kop

 

[Pickwickpick]

That Fisher resin can be an absolute life saver. Used it for the first time a couple of years back when I was trying to fit a vertical rad onto a wall that was made of cheese, none of the various fixings were secure enough so ended up setting threaded rods into the wall using the resin which worked a treat.

 

[Scott_D]

started first fixing the upstairs of a house refurb. 3 heating zones and secondary return on H/W.

 

[SimonG]

Nothing as exciting. First fixing that barrel sink and copper towel warmer.
[automerge]1599829893[/automerge]
That'll do.

 

[ShaunCorbs]

Finished this one off but the toilet flush pipe has a crack in it do had to do a temp repair (silicon) for now as it means gutting the wall to do a new frame

 

[SimonG]

Hurrah, its finally arrived and into its final position. It's the slimline so it's only 165kg.

 

[Pickwickpick]

Bet that was fun to move! How many of you does it take to lug that around?

 

[SimonG]

Bet that was fun to move! How many of you does it take to lug that around?

Just myself. Plenty of practice and........

 

[Pickwickpick]

Just myself. Plenty of practice and....

Nice! Its amazing what you can do by yourself with a little bit of ingenuity and no other options.

 

[ShaunCorbs]

Hurrah, its finally arrived and into its final position. It's the slimline so it's only 165kg.

lever valves for the pump ?

 

[Jim Goodenough]

started first fixing the upstairs of a house refurb. 3 heating zones and secondary return on H/W.
View attachment 45350

Is that Hep2o Scott?

 

[Scott_D]

Is that Hep2o Scott?

Yes, hep for heating and cold water

 

[SimonG]

lever valves for the pump ?

Yes, lever valves for pumps and 2 loose ones for flow and return from boiler.

 

[ShaunCorbs]

Yes, lever valves for pumps and 2 loose ones for flow and return from boiler.

thats a good step in the right direction from the manufacturer

 

[Scott_D]

What do you do when the customer doesn’t want to spend any money

 

[Harvest Fields]

What’s the pull cord for mate? I’ve been removing a massively stubborn air lock on a gravity system.

 

[Aquarius]

What’s the pull cord for mate

pullcord or plumbob?

 

[SimonG]

Apparently that's how you tie in an oil boiler and a fire back!

 

[Scott_D]

Ecotec pro 24 replacing an old Baxi
Anyone who doesn’t have a self cutting drain off in their tool kit should get one!!

 

[Harvest Fields]

Are they any good mate? Is that a 22mm one?

 

[Scott_D]

Are they any good mate? Is that a 22mm one?

I have both. Yes the are good, saved me a couple of times. Worth getting a set for £10ish

 

[SimonG]

Playing with my new toy this morning. It's a beast.

 

[Harvest Fields]

Playing with my new toy this morning. It's a beast.

Is that a kango? Not seen one in a while

 

[SimonG]

Toolstations best. Einhell £120.00. It wont get a lot of use, but by does it beat the sds drill

 

[Aquarius]

Playing with my new toy this morning. It's a beast.

Mmmmmmmmmmmmmm nice !!!!! (Bloody 20 characters thing)

 

[Harvest Fields]

I have both. Yes the are good, saved me a couple of times. Worth getting a set for £10ish

Where did you get them from? Got a link. I can only see 15mm

 

[ShaunCorbs]

BES.co.uk | Next Day Delivery On 15,000 + Plumbing Supplies

www.bes.co.uk

 

[Scott_D]

Williams and co for mine, also eBay

 

[Harvest Fields]

Thanks both. It’s appreciated.

 

[king of pipes]

Kitchen sink swap today it was a total pig to do, getting it out was the easy bit the worktop needed cutting out bigger and the cabinets needed trimming out, i did like the way the tap fixed to the sink looked tidy once compleate. Kop

 

[Harvest Fields]

Looks nice mate. Definitely worth the effort.