Recent content by Activate Trade Training

  1. A

    UFH with Capillary Type Mixing Valve

    Yes - the recommendation above is accurate for your system. This system relies on a higher temperature difference to effectively mix and achieve the desired manifold temperature. Your current issue indicates the water isn't hot enough to meet the desired 45°C setting. The efficiency of the...
  2. A

    Electric shower problem

    It sounds like your shower might not be getting enough water due to the way it's connected. When teeing off a toilet's cold feed, you might not get enough flow for a good shower. First, check if there's any blockage in the pipes or shower head that's reducing flow. Also, ensure the pipe size to...
  3. A

    Shower problems

    Anthony - it sounds like there might be an issue with air trapped in the pipes or a partial blockage affecting your rain head's performance. Since the handheld shower works fine, the problem seems isolated to the rain head path. Try running both showers simultaneously to help remove any air...
  4. A

    Digitron APM140 Differential Manometer - Out of range issue

    It sounds like your meter might be in a locked mode or has a calibration issue perhaps? Try resetting it to factory settings - you can look for a reset button or option in the menu. If that doesn't work, check if there's a specific combination of buttons to unlock or recalibrate it.
  5. A

    Re: heated towel rail stopping working

    That valve replacement seems to have affected your towel rail working... First off, check if the valve settings were correctly adjusted for your towel rail. If pressing the flame button temporarily fixes it, then chances are there could be an airlock or the valve isn't opening properly. Try...
  6. A

    Radiator return valve shutoff issue

    It sounds like you've encountered lockshield valves, which are common on radiators but often don't have those more visible handles found on TRVs. These valves are designed for a specific setting and not regular adjustment, which is why they seem less accessible. To turn these off, you typically...
  7. A

    Sink drainage

    Yes, waste pipes can indeed go straight into the ground, especially in newer builds. When flooring around this pipe, ensure a neat finish by leaving a small gap around the pipe to accommodate any movement or expansion. You can use a flexible sealant or a grommet to seal this gap, preventing...
  8. A

    Some radiators not hot

    Check if the radiators are correctly sized for the room's heating needs. It sounds like it could be a circulation issue. Ensure the pump is working properly and consider flushing the system to remove any debris or sludge that may be blocking flow.
  9. A

    Four sewage smell coming from shower trap

    The presence of foul-smelling air and pressure from your shower trap isn't normal and indicates a problem. The water in the trap is designed to create a seal that prevents sewer gases from entering the room; however, a depth of 38mm might be insufficient for this purpose. The standard...
  10. A

    GlowWorm Boiler Burner Never Switches Off

    It sounds like your boiler is continuously running due to the absence of a room thermostat, leading to overheating. The flashing radiator icon and constant flame symbol indicate it's trying to heat beyond necessity. Installing a room thermostat will help regulate the temperature efficiently by...
  11. A

    gas service pipe under slab

    To be honest, burying gas service pipes, especially steel and copper, is not totally recommended without consulting local building codes and a professional first. It may require specific protection or rerouting to ensure safety and compliance.
  12. A

    Recent boiler room upgrade

    Great transformation - looks really good!
  13. A

    Can I use push fit type tap connectors on toilet fill valve

    Absolutely! A push-fit tap connector is suitable for providing flexibility and ensuring a secure connection without the need for soldering. Ensure compatibility with your pipe size and material for a leak-free installation. Good luck!
  14. A

    Main 24HE constantly cutting out and firing back up on HW and Heating and intermittent flame failure light.

    Couple of possible things spring to mind: could be a faulty diverter valve, air locks in the system, a malfunctioning thermostat, or even perhaps electrical connections that are not secure. Hard to know for sure without a thorough inspection of course.
  15. A

    Radiator Not Heating Up

    The issue might be due to a blockage in the pipes leading to the original radiator or a balancing issue within your heating system. Begin by fully balancing the radiators, starting from the closest to the boiler to the furthest. If no improvement, inspect for internal blockages or a...

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock